Zum Hauptinhalt springen
Calculator Tools
Gesundheit & FitnessKostenlosOhne Anmeldung

Due Date Calculator - Kostenloser Online-Rechner

Your due date is calculated from the first day of your last menstrual period (LMP) using Naegele's rule - add 280 days. This calculator shows your estimated due date, current week of pregnancy, and the typical conception date.

  • Formel auf der Seite sichtbar
  • Läuft in Ihrem Browser
  • Ihre Eingaben bleiben privat
days

Standard is 28; adjust if yours is different

Estimated due date

5 June 2027

219 days to go

Currently

8 wk 4 days

1st trimester

Conception (estimated)

12 September 2026

Progress20%

1st trimester · weeks 1-12, organ formation, morning sickness

2nd trimester · weeks 13-26, anatomy scan, energy returns

3rd trimester · weeks 27+, growth phase, delivery prep

Naegele's rule is a starting estimate - only ~5% of babies are born on the exact due date. Most arrive between weeks 38-42. An ultrasound between weeks 8-13 gives the most accurate dating, especially if your LMP is uncertain.

Ein Teil der Inhalte wird noch auf Englisch angezeigt.

Info

Due Date Calculator verstehen

The expected due date (EDD) is the single most-important date in pregnancy - every prenatal scan, blood test, fetal-health screening, and delivery plan revolves around it. This calculator computes EDD using Naegele's rule, the worldwide clinical standard developed by Franz Karl Naegele in 1830 and still used by virtually every obstetrician today. The formula is simple: add 280 days (40 weeks) to the first day of your last menstrual period. The calculator also adjusts for non-standard cycle lengths, giving more accurate dates for women with shorter or longer cycles.

The EDD is exactly that - estimated. Only about 5% of babies arrive on their due date; the normal range of full-term delivery is 38-42 weeks. Most first-time pregnancies tend to extend slightly past EDD; subsequent pregnancies tend to deliver closer to EDD. A first-trimester ultrasound (ideally 8-12 weeks) is more accurate than calendar-based EDD and is the gold-standard correction - once you've had that scan, the ultrasound EDD takes precedence over the calculator's estimate.

Anleitung

Due Date Calculator in 3 Schritten nutzen

  1. Enter the first day of your last menstrual period.

  2. Adjust your average cycle length if it's not the standard 28 days.

  3. See your estimated due date, current pregnancy week, and days to go.

Die Formel

So funktioniert Due Date Calculator

Naegele's rule: due date = LMP + 280 days. For non-28-day cycles, the rule is adjusted by (cycleLength − 28) days because ovulation timing shifts. This gives a 40-week pregnancy from LMP, equivalent to 38 weeks from conception.

Formula

Due date = LMP + 280 days + (cycle length − 28) days

  • LMPFirst day of last menstrual period
  • 280 daysStandard pregnancy length from LMP
Die Mathematik

Wie Due Date Calculator zum Ergebnis kommt

Naegele's rule adds 280 days to the first day of the last menstrual period. The 280 days break down as: roughly 14 days from LMP to ovulation (in a typical 28-day cycle), plus 266 days from conception to delivery - the actual gestational length. For non-28-day cycles, the calculator adjusts by adding (cycleLength − 28) days, because women with longer cycles ovulate later. A 32-day cycle pushes ovulation to day 18 and EDD to LMP + 284 days; a 26-day cycle moves ovulation to day 12 and EDD to LMP + 278 days.

Beyond Naegele's rule, alternative dating methods include: first-trimester ultrasound by crown-rump length measurement (most accurate, ±3-5 days), second-trimester ultrasound by biparietal diameter (less accurate, ±7-10 days), and IVF-based dating where the embryo transfer date is known precisely. For IVF, EDD = transfer date + 263 days (day-3 transfer) or + 261 days (day-5 transfer). IVF eliminates the LMP and ovulation uncertainty entirely.

Pregnancy timeline mapped against EDD: 12 weeks - end of first trimester, double-marker test; 18-22 weeks - anomaly scan; 24-28 weeks - gestational diabetes screening; 28 weeks - anti-D injection for Rh-negative mothers; 32-34 weeks - growth scan; 37 weeks - full-term begins, delivery planning; 40 weeks - EDD; 41-42 weeks - induction discussion if not delivered. Knowing the EDD lets you book all these milestones at the right time.

Beispiele

Gelöste Beispiele

LMP: 1 January 2026, 28-day cycle

EDD = 1 January + 280 days = 8 October 2026. First-trimester scan window: late February to early April. Anomaly scan: mid-May to early June. Delivery range: 24 September to 22 October 2026 (37-42 weeks).

LMP: 15 February 2026, 32-day cycle

Cycle adjustment: +4 days. EDD = 15 February + 280 + 4 = 25 November 2026. The 4-day adjustment matters for accurate scan timing - going by the standard formula would book your anomaly scan slightly too early.

Anwendungsfälle

Wann Due Date Calculator nutzen

  • Expecting mothers planning their pregnancy timeline and scheduling prenatal care.
  • Couples planning conception with a target delivery month in mind.
  • Working women scheduling maternity leave start date 6-8 weeks before EDD.
  • Family members and partners tracking pregnancy progress and planning support.
  • Birth-plan preparation in the third trimester.
Vorsicht

Häufige Fehler und Stolperfallen

  • Treating EDD as the actual delivery date. Only 5% of babies arrive on EDD; plan for ±2 weeks variability.
  • Forgetting to adjust for cycle length. Standard formula assumes 28 days; longer cycles need adjustment.
  • Skipping the first-trimester ultrasound. It refines EDD by ±5-7 days and corrects any LMP errors.
  • Using LMP-based EDD for IVF pregnancies. IVF dating is more precise; use transfer date.
  • Worrying about preterm delivery before 37 weeks unless symptoms warrant. Full-term is 37-42 weeks.
Profi-Tipps

Mehr aus diesem Tool herausholen

  • Book your first prenatal appointment within 6-8 weeks of LMP. Early ultrasound is the most accurate dating.
  • Note your LMP date carefully - write it down. Many women forget the exact date once pregnancy is confirmed.
  • Use the EDD to schedule all major prenatal milestones (scans, tests, vaccinations).
  • Plan maternity leave to start 4-6 weeks before EDD - gives buffer for early delivery and rest before labour.
  • Pair this calculator with the pregnancy, ovulation and conception calculators on this site for complete pregnancy planning.
FAQ

Fragen zu Due Date Calculator

How accurate is the due date?

Only about 5% of babies are born on the exact due date - the calculation is a best estimate. Most births happen between 38 and 42 weeks, with full-term defined as 37-42.

What if I don't know my LMP?

An ultrasound between weeks 8-13 is the most accurate dating method. If your LMP is uncertain, see your gynaecologist for a dating scan.

Does cycle length matter?

Yes. For a 32-day cycle, the due date shifts 4 days later because ovulation (and conception) occurs 4 days later than the 28-day reference. Most calculators ignore this - ours adjusts.

Is 280 days the same as 9 months?

Approximately. 280 days is 40 weeks or about 9 months and 7 days, depending on the calendar months covered.

What is gestational age vs fetal age?

Gestational age counts from LMP (40 weeks total). Fetal age counts from conception (38 weeks total). Indian and Western obstetric care uses gestational age.

Should I use this for IVF dating?

No - IVF uses the embryo transfer date directly. Add 261 days for a day-3 transfer or 259 for a day-5 transfer. Speak to your fertility clinic for exact dating.

Track health metrics with care

Body composition, daily energy needs and pregnancy timelines all rest on formulas validated across millions of people, but no single number tells the whole story. The values from this calculator are point estimates with a known margin of error - body fat from skinfold or US Navy method has roughly a ±3% standard error compared to a DEXA scan, and BMR can vary ±10% person to person at the same height and weight. Use these numbers to track trends week over week, not to chase decimal precision day to day.

Pair this tool with the BMR, TDEE, calorie and macro calculators to turn a single measurement into an actionable plan. None of these tools are a substitute for a qualified doctor, registered dietitian or certified strength coach - but they remove the busywork so you spend more time on training and recovery, less on math.

The Due Date Calculator is part of the Health & Fitness suite on Online Calculator Tools, alongside 6 related calculators. All tools share the same UI patterns, the same privacy-first rendering (nothing is sent to a server), and the same commitment to showing the formula and assumptions behind every result.